RAID Reconstructor
Recover Data from a broken RAID Level 5 or 0 Array
Runtime's RAID Reconstructor will help you recover
data from broken
* RAID Level 5 Array consisting of 3 to 14 drives
* RAID Level 0 Array (Striping) consisting of 2 to 14
drives.Even if you do not know the RAID parameters,
such as drive order,
block size and direction of rotation, RAID Reconstruct
or will analyze your drives and determine the correct
values. You will then
be able to create a copy of the reconstructed RAID in
a virtual image (.vim), an image file (.img) or on a
physical drive.Once you created an image you can either
mount it with Captain Nemo or use it for further
data recovery processing with Runtime's GetDataBack.
If you create the image on another physical drive, you
can process it with Captain Nemo or GetDataBack too or
you might even be able to directly boot from it. Watch
these screenshots on how you recover your files using
RAID Reconstructor together with Captain Nemo. RAID
Reconstructor is read-only. It will not try to "fix"
your RAID. It will merely create a copy of your RAID at
another location. It will collect sector by sector from
each single drive involved and write these sectors in
the correct order to the designated destination. This
process is also called "de-striping".
Because one drive is redundant in RAID 5, it is
sufficient to have one less than the original number of
drives (N) in the array. RAID Reconstructor can
recalculate the original data from the N-1 drives. For
a RAID-0 (striped) array you will need all drives.
The RAID Reconstructor will recover both, hardware and
software
RAIDs. It will recover from broken Windows Dynamic
Disk sets.
New
Let us find the correct RAID parameters for you!
A RaidProbe can be taken if you do not find your RAID's
correct parameters. Take advantage of our experience.
If your RAID is recoverable, we will find the
parameters!
Here is how it works: RAID Reconstructor will create a
probe of your RAID drives which you would send to us by
FTP or upload to our server. We will analyze this
probe and attempt to find the parameters for you. You
would then enter these parameters into RAID
Reconstructor and continue your recovery. Please
contact us at support@runtime.org if you have further
questions. This is a manual service which we charge
$299 for. You will only be charged if we find the
parameters. To initiate a RaidProbe now, go to our order
page and select the "RaidProbe" service.
Note: RaidProbe is currently available for NTFS and EXTFS2/EXTFS3 formatted systems.
 | RAID Reconstructor V3.33Free Updates: Licensed users are entitled to free lifetime updates. Price: 30-day trial, $99 to purchase it System Requirements: Download RAID Reconstructor V3.33 Download Serial RAID Reconstructor-Serial.rar (624 B) (mediafire.com) RAID Reconstructor-Serial.rar (624 B) (depositfile.com) RAID Reconstructor-Serial.rar (624 B) (easy-share.com) |
No comments:
Post a Comment